Making a chicken house out of plastic bottles – part one

IMG_0595

Chicken house in progress

IMG_0604

IMG_0597

Top of completed wall

Recently, as those who know me are aware, I have been busying myself making a chicken house using hundreds of plastic bottles collected from the neighbourhood.

  • Step one – collect bottles
  • Step two – fill with food colouring and water and screw lids on tightly
  • Step three – dig a shallow trench about half the depth of a bottle lying down to anchor the wall

    IMG_0601

    Plastic bottle wall in progress

  • Step four – fill the trench with bottles about half a bottle width apart
  • Step  five – mix concrete (about one 40kg bag of cement to five 25kg bags of sand)
  • Step six – put concrete between the bottom layer of bottles and start stacking the bottles on top, row by row
  • IMG_0461

    Step one: dig a trench and fill with bottles

  • Steps seven to infinity – stay tuned – I have grand plans!   We will see whether they eventuate, but my grand design should incorporate the following:

  • I have already poked holes in several bottles to make some ventilation and drainage for the lower wall
  • I am going to insert some 30 Litre yellow plastic cooking oil drums into the wall with an opening on the outside for filling and catching rain water, and an opening on the inside for the chickens to drink from
  • I am going to use guttering and a vertical stack of linked 30 litre plastic drums to collect rain water and auto fill the drinkers
  • I have collected dumped kerosine stoves to use as the roof ventilation vents
  • I have already made a prototype of a roof whirlybird ventilator out of a 2 litre coke bottle
  • I have already planted pawpaw seeds outside the sunniest wall
  • I am going to insert wooden fruit boxes into the wall as nesting boxes, with hatches for egg collecting on the outside
  • I may even insert a fresh water pond inside for growing small fish and for the chickens to drink from
  • the whole thing has to be mongoose proof!

    IMG_0598

    One wall completed

Also, since I saw the flip flop art, it occurred to me that I could even partly shingle the roof with flipflops for insulation from the heat, but I am not sure… otherwise since I saw the angel wing flip flop art, perhaps I will breed artistic chooks, and install an art piece inside for their viewing pleasure.

It reminds me a little of one of my favourite books to read to the kids when they were little.  It was called “The Hilton Hen House”.

The construction is coming along so nicely that the teenagers are asking whether we can scrap the chickens and they can move into it as a teenage hangout.  I think that it will be really lovely actually, and am determined to sleep in there one night before we put the chickens in.

IMG_0462

Filling the bottles with water and food colouring

I know they make this kind of construction elsewhere in the world and make houses, schools and other structures, but I never realized it would be so easy (and fun).  If people here in Fiji who live in settlements (slums) had access to the money for concrete, the bottles are free.

Even the timber and iron has been salvaged and saved from landfill.

Perhaps I will write a grant proposal after this is finished.  A great video on the squatter settlement conditions is online at http://www.smh.com.au/multimedia/world/fijis-squatter-settlements-20091127-jwda.html

Advertisements

Recycled umbrella tote bags, bicycle paniers, and more….

umbrella bag

Photo source: http://www.etsy.com

People are so smart!  A while ago, I got a comment from a reader in the UK who upcycles umbrellas into tote bags and sells them through her etsy shop.  She also uses the umbrellas to make bicycle paniers, painting smocks, bunting and more.  She tells me that one rainy weekend, she collected over  60 discarded umbrellas!

I thought that it was worth posting a link for any readers who are interested in placing an order at http://www.etsy.com/uk/listing/176803426/upcycled-umbrella-tote-bag?ref=shop_home_active_1

The maker is the lovely Jo Bodley, and she has a written “how to” on her blog http://carminabiryani.blogspot.com/

Jo contacted me after seeing my attempt at making bean bags out of broken umbrellas.

Thanks so much Jo!  In the UK, you seem to have some beautiful umbrella fabrics!  In Fiji, the choice of trash to treasure is more limited.  I am going to give the tote bags a try, after I finish making my chicken house out of plastic bottle bricks filled with coloured water.

How to make a bed from recycled paint cans

IMG_0033IMG_0026

Ok, here it is, as promised, the bed from recycled paint cans, sticky tape, and cardboard!  IMG_0003

Let me make it clear, I am not trying to set myself up as some kind of self professed DIY guru (although maybe I should start a blog site called just that…) or trying to turn this blog site into a site about how to make things out of recycled stuff. Of course my daughter has visions of becoming an overnight internet sensation from this post.  If enough people want a bed out of junk, maybe she will!

I am simply a mum living in a place where furniture is expensive, money is tight, and there is so much that is discarded that is actually useful.  I am often a woman on the edge, wondering how I am going to maintain a lifestyle that I want the kids to have in a country like Fiji where money is always tight.

IMG_0009I am also concerned constantly with the perception here of what is actually “trash” or “rubbish” as once something is discarded it is immediately viewed as that.  All of the paint cans, lids and cardboard that I used would have otherwise ended up in landfill, a problem for my kids to have to worry about in their lives – heavy metals, paints etc leaching into the mangroves and the sea.  Living in an island nation in the middle of the Pacific, the prospect of an ocean full of toxins and rubbish, and void of fish is actually frightening.  I have once seen a fridge floating in Suva Harbour. 

Our live in family recently increased from me, my husband and one teenager; to me, my husband and three teenagers.  The two new teenagers arrived from Australia with a suitcase each that was filled with nothing that is actually useful in Fiji a land of alternating mud and dust – no towels, no toothbrushes, no sheets, just video games and high heels it seemed IMG_0014to me.  Frustration and despair got me nowhere, but I must admit I felt it keenly.

Anyway, with two extra kids, and no extra money or furniture, I had to pull myself together and see what I could come up with.  If only I could work out a way to spin a towel or a sheet set from spiderwebs and butterfly tears, my world would be complete!

I didn’t, but I did manage with the help of my 15 year old daughter to make her a bed using only the below.  IMG_0012The hardest part was being disciplined enough to pick up the stuff when I saw it in the dumpster and take it home, and to stop my family from trying to “tidy up my junk” every Saturday where they would try and put it all kinds of places to get it out of the way.  Also, my nieces and nephews were constantly using the paint lids as frisbees and hurling them down the hill where I would often find them a week later.

I used:

  • 50 used paint cans (you could substitute large juice cans)
  • 4 rolls of packing tapeIMG_0002
  • 3 regular cardboard boxes
  • 1 cardboard box from a large electrical appliance
  • 8 recycled coke bottle lids
  • some of the white plastic binding tape that they use for packing white goods
  • about 30 small screws and a screwdriver
  • 1 thin piece of foam
  • Material to cover
  • The only things that I bought new were the screws and the packing tape and the foam, plus the material to

    IMG_0015

    cover, all the rest of it was salvaged from building sites and dumpsters, plus Jacks of Fiji Nakasi store gave us some great boxes.  The total cost of the bed was $18.

Instructions:

  • We used 50 cans in ten rows of five to fit a single mattress.
  • Lay them out to make sure it fits.
  • Make a cardboard stencil to cover 4 cans, 6 cans and 3 cans.
  • We grouped the cans into fours and sixes and then put them together as you would leggo so as to give the structure some strength.
  • We then had a group of two lots of six cans, and one lot of three cans.
  • You need a stencil for both the top and bottom of each set.  I think we used eight stencils of the 4 can set, twelve stencils of the 6 can set, and two stencils of the 3 can set.IMG_0018
  • Trace the stencils onto cardboard boxes and cut with stanley knife or scissors
  • Tape the paint cans together in sets, then tape the cardboard stencils to the top and bottom of each.
  • Then tape the leggo pieces together.
  • Lay the large cardboard on the floor and place the large leggo pieces together
  • Score the cardboard so that you can fold the extra cardboard up to make the sides of the bed.
  • Tape around the cardboard.
  • Place some cardboard boxes on the top of the bed, and cover with a piece of thin foam if you have it.
  • Lay the material/fabric on the floor overlapping so that there are no gaps if you are using pieces, and make sure that there is enough on each side to cover the sides of the bed, and fold over the bottom.
  • Turn the bed frame upside down and lay on top of the middle of the material.IMG_0019
  • Cover the base of bed with a piece of material, and fold the top material over the sides and to the bottom so that no joins will show when the bed is right side up.
  • Use a piece of white packing tape, or cardboard to get a straight line, and screw the material into the base, all folded in, using the packing tape as a guide.
  • Use some long screws, and screw the coke bottle lids into the base as small legs.
  • Turn the bed over, put on the mattress, go to sleep!IMG_0020 IMG_0022 IMG_0029IMG_0031

How to make a bean bag cushion chair from recycled umbrellas

             IMGP2363 Recycled umbrella bean bag cushions

From this

IMGP2322

Two umbrellas dumped on the ground

To this!

IMGP2363

IMGP2354

using a cardboard stencil

Ever wondered what to do with broken umbrellas?  In Fiji, after any downpour of rain, along the roadside, you will see literally hundreds of broken umbrellas – ahh, they don’t make them like they used to.  By the way, one thing I discovered when I was doing this project was why my grandma always told me to buy a good quality umbrella regardless of the cost.  I have often wondered why umbrellas these days seem so flimsy and turn inside out the the slightest gust of wind.  Is it because they are so cheap, and poorly made?  Not really.  When you have to take one apart, you see the enormous amount of effort that has gone into making one.  The IMGP2359umbrella skin is hand stitched very well to the spokes at several places on each spoke, and then hammered into the top of the handle using a metal clamp.  However, when looking at the fabric of two umbrellas that seem an equal size, and then sewing them together, I noticed that not all the triangular panels are exactly the same size, even though they look it when the umbrella is up.  Actually with the cheap umbrellas, the fabric

IMGP2343

triangles are all quite different sizes.  This must create a tension issue when the umbrella skin is stitched to the spokes, and therefore create instability when the wind catches the umbrella.  If I were a scientist, I would do an experiment to see if the part that flies up in the wind, is the section with the biggest piece of triangle fabric compared to the others, and therefore with the lowest tension.  Sadly, or maybe a good thing for the world, I am not a scientist.

Now to the real business of this post.  Seeing so very many broken umbrellas (actually only the frames break usually, and the fabric is intact) by the side of the road after a bit of rainy weather, and needing some more furniture, I decided to see what I could do.

I took a small stitch unpicker (or scissors would do) with me and walked to the bus stop.  On the way I found two or three umbrellas in the gutter, and unpicked the fabric from the frame which took about 20 seconds each time.  I stuffed the fabric in my bag and felt bad that I left the frames where I found them.  I then got the bus 5 minutes down the road to my local market place, and got off.  I collected another 10 umbrellas there, and did the same thing, and went home.

I have since felt so guilty about leaving the frames on the road side that I take them home and use them for trellises for the long beans and cucumber plants.

People thought I was very strange and asked me what I was doing, but now, taxi drivers who have taken me home and seen the cushions I made bring me umbrellas each week when they find them on the road side!

IMGP2365I soaked the umbrella skins in a bit of bleach for a while, washed them and hung them out to dry.  The rest was easy!

Check the umbrella skins for any small breaks in the stitching, sew up the top part where it joined the top of the handle (there will be a small hole in the middle of each umbrella circle).

IMGP2349

Dom spray painting

IMGP2356You can spray paint a stencil pattern if you like.

Sew two umbrellas of the same size together inside out and leave a small opening to insert the filling.

Fill with foam chips or polystyrene balls, or even used and clean plastic bags and old clothes.

Sew up the hole.

IMGP2374

Jone and Samu

IMG_5061

Ellena and Kim

Sit down!

Read the paper,

IMG_1274

Renee having a hard earned rest

watch TV,

relax!